DDR5 ECC
Memory Modules
DUAL ERROR CORRECTION MEETS HIGH PERFORMANCE
ADATA’s industrial-grade DDR5 ECC U-DIMM and ECC SO-DIMM memory modules utilize original SAMSUNG ICs and offer capacities of 16GB and 32GB. DDR5 performs at twice the bandwidth of DDR4 with data transfer rates of up to 4800 MT/s, while also operating at a lower 1.1V for improved energy efficiency. In addition, they feature on-module Power Management ICs (PMIC), which improve power management and provide a more stable power supply with per-module granularity. What’s more, the DDR5 ECC U-DIMM and SO-DIMM memory modules are equipped with On-die ECC (error correcting code) and Side-band ECC technologies for more reliable data transmissions.
Advantages of DDR5 ECC Series
4800 MT/s
1.5X faster transfer rate compared to DDR4
1.1V
Consumes 9% less power compared to DDR4
PMIC
(Power Management IC)
Improved power supply stability
32-bit Channels x 2
Improve performance effectively and reduce the latency
Bank group x 2
Ensures data be work effectively during transmission
ECC Technology x 2
On-die ECC and Side-band ECC technologies for more reliable data transmissions
Why DDR5?
ADATA's industrial-grade DDR5 memory modules feature the advantages below, making them ideal for automation, networking, surveillance, IPCs, embedded systems and servers. At present, ADATA DDR5 series are being widely implemented for automation and servers.
Interface
Frequency
Operating Voltage
Power Management
Bank Group
Channel
On-die ECC
DDR4
2600 / 3200 MT/s
1.2V
Controlled by motherboard
16
1
N/A
DDR5
4800 MT/s
1.1V
By PMIC
32
2
Yes
TARGET APPLICATIONS
5G Networking
Edge Computing
IoT
Server
Surveillance
Insights
View all
How to Choose Industrial SSD for Medical Devices?
Medical devices are rapidly becoming more digital. From medical imaging systems, patient monitoring devices, endoscopy systems, and automated dispensing cabinets to healthcare edge gateways, an increasing number of healthcare applications must continuously record medical images, sensor data, operation logs, alarm events, and system status while supporting diagnostic and treatment workflows.
What Is an NVMe SSD?
Learn what an NVMe SSD is, how NVMe differs from SATA SSDs, and why NVMe storage is ideal for automation, industrial systems, and high-frequency data logging.
What Is ECC DRAM?
Learn what ECC DRAM is, how error correction works, and why it matters for data integrity, system stability, networking security, and mission-critical computing.
How to Choose NVR Storage: Key Factors for Efficient Surveillance Systems
NVR storage is not only about capacity planning. It also affects data integrity and long-term system reliability. For AI NVR and 24/7 recording environments, storage devices must handle heavy write workloads, RAID rebuilding, and continuous recording. As a result, choosing between HDD vs. SSD and selecting the right surveillance SSD have become critical for modern surveillance deployment.
What Is the SSD Temperature Range?
Temperature is the silent limiter of every SSD, and the SSD temperature range is both a performance spec as well as a reliability spec. Under sustained load, NVMe firmware tracks a composite temperature and will start to throttle lightly or heavily. So, write throughput drops hard and latency spikes. Heat also speeds charge leakage inside NAND, which accelerates retention loss. The effect worsens as cells age from program/erase wear. Thus, you burn endurance faster and raise data-retention trouble when the drive later remains unpowered.
Garbage Collection in Industrial SSDs: What You Need to Know
Garbage collection in SSDs is the controller's quiet cleanup job. It compacts still-valid pages into new space and erases blocks that are now mostly junk. That might sound weird until you remember NAND flash can't overwrite a programmed page. It must erase first, and erase happens at the block level, not per page. So, updates become "write elsewhere, then clean later."
